Phoenix D850 – Portable Desiccant Dehumidifier ( Discontinued)


  • 370 PPD @ AHAM Water Removal
  • Runs on 208-240V, 50/60Hz, 50A or 30A
  • 850 CFM of Process Air Flow
  • -10°F to 120°F
  • WTRDHMD>

Item # PH-4034000-EA | Mfr. Model # 4034000


UNITMANUAL PRODUCTINFO SHEET


Customized Restoration Packages    Call for Pricing    720-374-2375

Out of stock

The Phoenix D850 provides the perfect blend of portability, versatility, and performance the restoration industry has been seeking in a medium-capacity desiccant dehumidifier. It combines the wide operating range and ultra-low grains of the Phoenix 1200 with the portability of an LGR like our Phoenix 250 Max. The included remote humidistat and process blower speed control allow you to tailor the drying to the task at hand. The D850 operates both vertically or horizontally and is perfect for low clearance applications, fitting inside most crawlspaces. The lower carrying handle makes moving the unit down stairs, as well as into and out of a crawlspace, a breeze.

The PowerDry D850 delivers 850 CFM of ultra-low grain process air and removes a stunning 370 pints per day at AHAM conditions. The true four-hole design* allows for positive, neutral, or negative pressurization of the affected area. Three-hole desiccants** inherently pull unaffected and/or outside air into the drying chamber. Power to the unit is provided by either a 30- or 50- amp, 230-volt grounded power cord (both are included). The reactivation air stream is ducted through 6” flex duct, which is also provided with the unit.

* Having completely separate process and regeneration airstreams.
** Where regeneration airstream is pulled from the process airstream.

When to use:

  • D850 is ideal for drying low evaporation materials such as concrete, brick, plaster, and hardwoods
  • D850 performs better in cooler temperatures (below 70°) than refrigerant dehumidifiers
  • D850 desiccant is sized for 2 ACH (class 2) for up to 25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000 cu.ft

How to use:

  • Use Max Water when primarily drying the air
  • Use Max Grains when tenting or drying low evaporation materials
  • The unit can operate horizontally or vertically
  • Duct the reactivation outlet (225 CFM) outside the affected area or into refrigerant dehumidifier(s) with +350 CFM inlet

Specifications

Part Numbers

4034000

Power

208-240 VAC, 50/60 Hz, Single Phase
30A or 50A Branch Circuit Protection
(24A or 40A Actual Amp Draw)

Water Removal

370 PPD (175 LPD) at 80°F/60% RH (AHAM)

CFM

850 CFM Process Airflow
225 CFM Reactivation Airflow (188 CFM 50Hz)

Filter

Pleated 20” x 20” x 2” Media MERV 11 (Process)
Pleated 9” x 11 3⁄8” x 13⁄4” Media MERV 11

Ducting Options

Process Inlet: 18” or 12” Flex-Duct (Optional)
Process Outlet: 10” Lay-Flat Collar (Optional)
Reactivation Inlet: 6” Flex-Duct (Optional)
Reactivation Outlet: 6” Flex-Duct (Required)

Cord Length

2 Each 8’ Power Cords (1 Dryer, 1 Range)

Unit Dimensions

Width: 20” (51 cm)
Height: 41” (104 cm)
Depth: 23.25” (66 cm)
Weight: 105 lbs (70.30kg)

Operating Range

-10°F to 120°F

 

Features

850 CFM of Process Air Flow
• 370 PPD @ AHAM Water Removal
• Ultra Low Grains or Max Water Removal
• True Four Hole Desiccant
• Operates Vertically and Horizontally
• Runs on 208-240V, 50/60Hz, 50A or 30A
• Small Size and Weight
• Legendary Stainless Construction
When to use:
• D850 is ideal for drying low evaporation materials such
as concrete, brick, plaster, and hardwoods.
• D850 performs better in cooler temperatures (below
70°) than refrigerant dehumidifiers
• D850 desiccant is sized for 2 ACH (class 2) for up to
25,500 cu.ft and up to 3 ACH (class 3 & 4) on 17,000
cu.ft
How to use:
• Use Max Water when primarily drying the air
• Use Max Grains when tenting or drying low evaporation
materials
• The unit can operate horizontally or vertically
• Duct the reactivation outlet (225 CFM) outside the
affected area or into refrigerant dehumidifier(s) with
+350 CFM inlet

Accessories | Filters

4026859 6” Metalized Polyester Flex-Duct 25’ (Standard)
4020128 6” Insulated Flex-Duct 25’
4024750 12” Metalized Polyester Flex Duct 25’
4023643 18” Metalized Polyester Flex Duct 25’
4022537 10” Lay Flat Duct 500’
4024935 10” Lay Flat Duct 250’
4024440 Kestrel 3000 Multi-Function Air Meter
4030115 Reed LM 8000 Multi-Function Meter
4027326 25’ 240V Cord Kit
4031045 50’ 240V Cord Kit
4031046 75’ 240V Cord Kit
4031047 100’ 240V Cord Kit
4036662 Remote Humidistat
PROCESS AIR FILTER REPLACEMENT
4022636 20” x 20” x 2” MERV 8 Filter (Standard)
REACTIVATION AIR FILTER REPLACEMENT
4027168 9” x 11-3/8” x 0.25” Pre-Filter (Standard)

Warranty

Year 1 – 100% of Parts and Labor

Video