OptiShield, Fabric Ready Fine Fabric PreSpray (MTX)

OptiShield Fabric Ready Fine Fabric Pre-Spray is specifically designed for the safe and effective cleaning of both wool and pH-sensitive fabrics. It lifts and suspends tough soils without harming delicate natural fibers, wool, and stain-resistant carpet.

• Tough pre-spray that is gentle enough for natural fibers
• Great for those problem rugs
• pH: 8.0 +/-1.0
• Safe for stain-resistant carpet and wool
• Dilute 4 ounces per gallon of water

Usage Instructions

Thoroughly vacuum upholstery.
Test for dye stability.
Pump Up Sprayer Dilute 4 oz ounces of Fabric Ready into pump-up sprayer and spray onto fabric. Agitate with a horsehair brush. (Note: With proper pre-conditioning, very little moisture should be required to achieve desired results.)
Rinse and extract

Extraction Zone highly recommends using a low-moisture hand tool such as the DriMaster Upholstery Tool, or Sapphire Upholstery Pro.

INJECTION SPRAYER (HIGH PRESSURE 1:8 TIP): Add 1½ quarts to 5-quart container

CARPET CLEANING: Spray on carpet, allow 5 to 15 minutes dwell time. Do not allow to dry before extraction

Warning: Always test materials for colorfastness, follow label directions, and never mix products unless specified in the label directions. Each situation reacts differently and results may vary.