CleanMaster Complete Guard Carpet and Fabric Protector (CASE OF 4 GALLONS)
Item # CM-CG-1G-4PK | Mfr. Model # 950-247
- pH 4.5 – 5.5
- Synthetic & Wool Carpeting
- Multi-Level Carpet and Fabric Stain and Soil Protector
- Coats fibers with a dyeblocking stain barrier
SDSSHEETPRODUCTINFO SHEETFRONTLABEL
$212.00
In Stock
Multi-Level Carpet and Fabric Stain and Soil Protector
Complete Guard Carpet and Fabric Protector represents cutting edge technology in carpet protectors today. It uses state-of-the-art, environmentally preferred short-chain fluorochemical technology to protect against damaging dry soils as well as both water-based and oil-based spills. Even better though is how Complete Guard coats fibers with a dye-blocking stain barrier to protect them from dye stains and common household food and beverage spills. Complete Guardprotects the fiber completely, not just at the top like conventional protectors. Conventional protectors rely on a repellency barrier across the top of carpeting to protect carpet fibers, and while such protectors perform well, especially when spills are cleaned up immediately, once a spill penetrates the protective barriers of repellent protectors they immediately bond to the fiber, creating difficult to remove stains.
Complete Guard also reduces or eliminates extended drying times you experience with conventional protectors, because it uses half the water of most other protectors. Special dispersing agents make sure that the carpet is thoroughly protected without soaking the carpet with more water. Your customers will love how easily spills are removed and how great their carpet will look between cleanings. Complete Guardis recommended for application to nylon and wool carpets, and greatly enhances the oil based soil repellency of olefin, polyester, and triexta carpet.
-
It uses state-of-the-art, environmentally preferred short-chain fluorochemical technology to protect against damaging dry soils as well as both water-based and oil-based spills.
-
Complete Guardcoats fibers with a dye-blocking stain barrier to protect them from dye stains and common household food and beverage spills. Complete Guardprotects the fiber completely, not just at the top like conventional protectors.
-
Complete Guardalso reduces or eliminates extended drying times you experience with conventional protectors, because it uses half the water of most other protectors
-
Consumer surveys show most homeowners want stain and soil protection, which makes selling fabric protector the most profitable add on service you can provide
-
Available Sizes: gallon
Directions:
- Always pretest for color fastness
- If accidental freezing occurs, allow to thaw at room temperature, then shake vigorously.
Low Moisture Dilution:
1. Dilute by mixing 1 part concentrate protector with 2 parts water.
2. Apply to freshly cleaned carpet using an electric or battery powered sprayer maintaining 35 to 50 psi with an 8004 or 8005 TeeJet nozzle.
3. Apply evenly over entire carpet surface.
4. Brush or groom the carpet.
5. Coverage will be approximately 400 to 800 sq. ft. per diluted gallon for damp or dry carpet. Coverage depends on carpet pile density; i.e. heavy pile residential requires 1 RTU gallon per 400 sq. ft. , low pile commercial requires 1 RTU gallon per 800 sq. ft.
6. For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.
Alternate Dilution:
1. Dilute by mixing 1 part concentrate protector with 4 parts water.
2. Apply to freshly cleaned carpet using an electric or battery powered sprayer maintaining 35 to 50 psi with an 8004 or 8005 TeeJet nozzle.
3. Apply evenly over entire carpet surface. For use with injection sprayer, remove metering tip to achieve 1 to 4 dilution.
4. Brush or groom the carpet.
5. Coverage: 240 to 480* sq. ft .per diluted gallon for damp or dry carpet. Coverage depends on carpet pile density; i.e. heavy pile residential requires 1 RTU gallon per 240 sq. ft. , low pile commercial requires 1 RTU gallon per 480 sq. ft.
6. For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.