3M™ Particulate Filter 2091/07000(AAD), P100

NIOSH-approved P100 Particulate Filter for respiratory protection against certain oil and non-oil based particulates

Versatile and simple to install 

The 3M™ Particulate Filters 2000 Series are made with electrostatic media to enhance the capture of airborne particles and reduce breathing resistance. These particulate filters are flame resistant and easy to install. Plus, 3M™ Particulate Filters 2000 Series are compatible with 3M™ 6000 Series Half Facepieces, 6500/6500QL Series, 7500 Series, 6000 Series Full Facepieces, FF-400 Series, 7800 Series and 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.

Help protect your workforce 

After you've determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ Reusable Respirator and corresponding particulate filters. 3M™ Particulate Filters 2000 Series are NIOSH-approved and are designed to help filter a broad range of oil and non-oil based airborne particulate contaminants when used with half and full facepieces, and certain 3M™ Scott™ full facepieces. These filters help provide respiratory protection from particulate contaminant concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA PEL with quantitatively fit tested full facepieces. Some models include nuisance level organic vapor and/or acid gas relief. Not for use in environments that are immediately dangerous to life or health (IDLH) or contain hazardous levels of organic vapors and/or acid gases (except hydrogen flouride on certain models).

Details

• NIOSH approved for environments containing certain oil and non-oil based particles
• Bayonet compatibility allows use with many 3M™ half and full facepieces and certain 3M™ Scott™ full facepieces
• Versatile protection against certain oil and non-oil based particulate contaminants
• Wide range of applications reduces inventory needs and training requirements
• Nuisance odor relief for acid gas levels below the Permissible Exposure Level (PEL)
• Part Number 07000
• 3M Product Number 2091
• 3M ID 7000051991
• UPC 50051131070009

NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501.

When properly fitted, use with appropriate cartridges for various applications including spray painting, lacquering, petrochemical and chemical manufacturing, pesticide spraying and agriculture for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Use with 603 adapter if only particulate protection is required. Do not use in environments that are immediately dangerous to life or health (IDLH).

Typical properties