OptiShield, Grout MD, Tile, Grout & Hard Surface Cleaner

Product Highlights

Grout MD is an amazing alkaline, water-based formula that easily tackles the toughest soil and grease buildup, leaving grout lines clean and bright.

• Powers through dirty floors and grout
• Restores smoke-damaged hard surfaces
• pH: 12.4
• For use on tile, grout and more!
• Variable dilutions

Grout MD Is the Only Tile and Grout Cleaner You'll Ever Need.

• Clean Grout
• Brighten Tile
• Dissolve Soot

Grout MD is an alkaline, water-based cleaner specially formulated to dissolve layer after layer of soil and grease buildup, leaving grout lines clean and bright. If you perform hard surface cleaning jobs, this is one product you shouldn't be without.

Not only does Grout MD make fast work of dull, dirty grout, it's also a highly effective all-around tile and hard surface cleaner. Try it on dirty floors with caked-on soil or grease. You'll be amazed at how quickly the most stubborn dirt and soils will disappear.

Grout MD's uses don't end there. It can also be used as a powerful pre-treatment additive that boosts the results of other cleaning agents. Simply add 8 oz to any ready-to-use cleaning solution and clean as usual. The results will blow you away!

Grout MD even restores smoke-damaged hard surfaces to pre-loss condition and prepares hard surfaces for painting. Grout MD's high alkalinity combined with aggressive solvents removes the smallest soil and soot particles, preparing the surface for better paint adhesion.

Do not use on furniture. Keep away from glass, aluminum, and stainless steel.

Dilutions

For hard surfaces: 4-32 oz per gallon of water
To boost cleaning: 8 oz per gallon of ready-to-use cleaning solution
Spotter: 4 oz per 28 oz of water

Usage Instructions:

Always pretest in an inconspicuous area for color fastness.

For Hard Surfaces:

Dilute 4 oz of Grout MD per gallon water to a maximum or 32 oz per gallon of water depending on severity of soiling.
Apply by spraying on.
Keep wet.
Scrub grout with brush if necessary.
For dirtier grout, repeat.
Wet vacuum and rinse with water.
To clean smoke-damaged walls and counters, first remove excess or loose dirt, grease, smoke, or soot by using a chemical sponge. Then dilute and apply as described above.

To Boost Cleaning:

Add 8 oz of Grout MD per gallon of ready-to-use cleaning solution.
Clean as usual.

To Use as an All-Purpose Spotter:

Dilute 4 oz of Grout MD per 28 oz of water.
Apply to spot.
Agitate with bone spatula.
Blot with clean white towel.